The PW 7016HT is an all-electric bench top heat seal machine. This cost effective, foot pedal operated machine is perfect for high-heat sealing of FEP (fluro ethylene propylene) and other Cryo preservation materials. This is accomplished when using the Cryo-Flex™ 
Alloy 20-C heat seal bands. Capturing seal parameter data is just one of the high-level features standard on this compact unit.
Your heat sealing will be consistently repeatable and Validatable because all Packworld heat seal machines use our exclusive Technology-The Optimum Sealing System. In addition, the unobstructed stainless steel top allows for ease in cleaning and the jaw bars are readily accessible for routine servicing.
Packworld Heat Sealers produce repeatable, high quality heat seals each and every cycle thanks to the Alloy-20 heat seal band.
Control System
The control system provides the safety and assurance required by industries when perfect temperature control is essential. Repeatable, high quality heat seals are made each and every cycle. The system utilizes the Alloy-20C heatseal or cut and seal band as the temperature sensing means, thereby eliminating the lag between actual and measured temperatures. The instantaneous and continuous feedback permits high response for greater productivity.
Simplicity and Safety
Easily operated by foot pedal control, this all electric heat sealer features a safety release jaw action. The jaws instantly release and "snap" open if they encounter any obstruction before the gap closes to two tenths of an inch.
Precision Heat Seal Control
The versatile impulse heat seal controller, RES-430, provides digital display of menu driven time/temperature profile with various time sequence possibilities. Time and temperature are keypad programmable with the cooling cycle controlled by either time or temperature. Actual temperature is displayed in real time and repeatable.
FDA/GMP Validation
Designed for validation, these heat sealers provide verification and feedback on all heat sealing parameters. Temperature and timing functions are set with keypad accuracy and can be verified with the display and with Data Capture with USB connection. Heat sealing time begins only after the prescribed temperature has been reached. The jaws remain closed until the heat seal cool down temperature is reached. Visual lock-out alarms alert the operator of functional problems.
Product Details
|
30 MONTH WARRANTY ON ALL PARTS, EXCLUDING CONSUMABLES
|
|
Models:
|
PW7016HT
|
|
Applications:
|
Medical Devices
Pharmaceuticals
Clean Room Applications
High Temperature
Samples
Research & Development
Electronics
|
|
Features:
|
All-stainless steel construction
Menu Driven Micro-Processor
Selectable Temperature, 0 - 500°C
High/Low Temperature Alarm and Lock-Out
High Temperature Heatseal Bands and Materials
Self Diagnostics
Auto-Calibration
Stainless Steel construction
Single or double band heatseal operation
Foot Pedal Activation
|
|
Benefits:
|
Portable-All Electric
Cost effective and Reliable
Quiet and Easy to Use
No special machine required for high temperature
Safety Assured
Maintenance Free
Single or Dual Bands
Calibration made simple
Easy change over of heatseal bands
Precise and repeatable heat sealing control
Clean room ready
Adaptable to a wide variety of uses
|
|
Options:
|
Data Capture with USB connection and PC Software
NIST traceable calibration
Stainless Table for product placement
Knife Cutting System
|
Specifications:
|
|
|
Heat Seal Length: 16 Inches
Heat Seal Width: 4, 6 or 8 mm
Temperature Range: 0 - 500°C
Timers: 0 - 99.9 Sec
Power: 115V, 15 amp
Dimensions: 16" x 19" x 7"
Weight: 56 lbs.
|
|
All Packworld-built machines are fully validatable, ensuring that your packaging
will meet even the most demanding requirements. We offer precision heat sealing
equipment ranging from bench top models to floor-standing production machines,
all powered by  Technology —The Optimum Sealing System—
for consistent, validatable and repeatable results, every time.
|
