Fully Validatable Heat Sealer
2000 Series
Benchtop Press System

The Press can be fitted with virtually any heat seal configuration that may be required. Two pressure regulators provide for a safety close at low pressure followed by high sealing pressure when the platen is essentially closed.

Timing can be preset to within 0.1 seconds. Cooling can be controlled by either Temperature or Time. Actual Temperature is displayed on the face-mounted digital display and is repeatable to within 3°C. Auxiliary ports are provided for both Data Output and foot switch actuation.

Specifications

Power Module: 115/230 VAC

Transformer Taps: As Required

Timer: 0 - 99.9 sec.

Temperature Range: 0 - 500°C

Size: 8-1/2” x 17-1/2” x 7”

Platen Press

Air pressure required: 80 - 100 psi

Platen Size: 6” x 8”

Stroke: 4”

Force: 490# @ 100 psig

Size: 8-1/2” x 12” x 21”