Fully
Validatable
Heat Sealer
PW 3116/PW 3124
(Vacuum Optional)
Precision Heat Seal Control
The versatile impulse heat seal controller, RES-440, provides
digital display of menu driven time/temperature profile
with various time sequence possibilities. Time and temperature are keypad
programmable with the cooling cycle controlled by either time or temperature.
Actual temperature is displayed in real time and repeatable
to within
3°C. This laboratory machine can be fitted with
any one of over 300 different  Alloy – 20
heatseal bands or wires depending upon the results desired.
Standard Features
- Commonly used bands
2 – 6mm x .15mm taper band, heat sealing
2 – 3mm x .15mm taper band, heat sealing
1 – 6mm x .15mm beaded band, heat seal/cut
1 – 0.7mm cutting wire, heat seal/cut
- Compressed air outlet
- Air pressure regulator and gauge
- Low pressure closing/high
pressure heat sealing
- Stainless steel case
- Single or double band heat seal operation
- Emergency stop button
Benefits
- Precise and repeatable heat sealing control
- Ease of operation
- Adaptable to a wide variety of uses
Options
- Datalogger for permanent records
- NIST traceable calibration
- Up to 24” heat sealing bars
- Vacuum option
| Specifications |
| Power Module: 2.2KVA@115VAC |
 |
| Transformer Taps: As Required |
|
| Timer: 0 - 99.9 sec. |
|
| Temperature Range: 0
- 500°C |
|
| Heat Seal Bar Length: 16” and 24” |
|
| Stroke: 0.50” |
|
| Jaw Force: 0 to 1000 lbs. |
|
| Size: 18” x 18” x 10” |
|
| Air Requirements: 80 - 100 psig |
|
|
